High Tg PCB Advanced PCB Manufacturing| YMS PCB

Inkcazo elifutshane:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs.

iparameters

Layers: 4L High Tg FR4 Material

UkuCinga kweBhodi: 1.6mm

Base Material:EM827 High tg

Min Imingxunya: 0.2mm

Ubuncinci beLayini Ububanzi / ukuSuswa: 0.075mm / 0.075mm

Ukucoca ubuncinci phakathi koLuhlu lwangaphakathi lwe-PTH ukuya kwiLine: 0.2mm

Size：208mm×148mm

Ububanzi bomfanekiso: 8: 1

Surface treatment：Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics

Thumela i-imeyile kuthi Download njenge PDF

Iinkcukacha Product

Tags Product

How do I classify high-TG materials?

Izinto eziphathekayo	TG	MOT
FR4-standard-TG	130°C	110°C
FR4-mittel-TG	150°C	130°C
FR4-hoch-TG	170°C	150°C
Polyimid-Super-hoch-TG-Material	250°C	230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.

You may apply the following values:

Material type	Typical „TG“
CEM1	110-130°C
FR4	120-180°C
PTFE	200-260°C
Ceramic	200-300°C
Polyimide	200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Uphawu	amandla
Uluhlu Lomaleko	3-60L
Efumanekayo Multilayer PCB Technology	Ngomngxunya kunye noMlinganiso weMbonakalo 16: 1
	ungcwatyiwe kwaye uyimfama nge
	IHybrid	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Ukutyeba	0.3mm-8mm
Ubuncinci bomgca ububanzi kunye nendawo	0.05mm / 0.05mm (2mil / 2mil)
IBGA PITCH	0.35mm
Ubuncinci boMatshini ogujiweyo	0.15mm (6mil)
Ukulinganiswa kwembonakalo yomngxuma	16: 1
Umphezulu Gqiba	I-HASL, i-HASL yasimahla, i-ENIG, ukuntywila kwi-Tin, i-OSP, iSilver yokuntywila, iFinger Finger, i-Electroplating Hard Hard, i-OSP ekhethiweyo, ENEPIG.etc.
Ukuhamba ngokugcwalisa ukhetho	Ukugqithiswa kufakwe kwaye kugcwaliswe nge-epoxy eqhubayo okanye engaqhubekiyo emva koko yatywinwa yaza yagqunywa ngaphezulu (i-VIPPO)
	Izaliswe ngobhedu, kuzaliswe isilivere
Ubhaliso	± 4mil
Solder Vuvu	Luhlaza, Bomvu, Mthubi, Luhlaza, Mhlophe, Mnyama, Mfusa, Matte Mnyama, Matte luhlaza njl njl.