High Tg material PCB 6 Layer High Tg Board| YMS PCB

Kort beskrivning:

High TG PCBs have an array of applications, from engines to industrial processes, WiFi boosters, and computer systems. They mitigate the internal damage a machine does to itself when it functions by raising the tolerance of a device to heat, moisture, and chemical corrosion. Not only do they improve functionality, but they also enhance the lifespan of PCBs in general by reducing common issues like short-circuiting. If you are looking to get the best-embedded systems or a high TG PCB tillverkare , look no further. You can use YMS technology to design your high TG PCB boards.

parametrar

Layers: 6L High Tg FR4 Material Board Thinkness: 1,6 mm Base Material:EM827 High tg Minhål: 0,2 mm Minsta linjebredd / avstånd ： 0,075 mm / 0,075 mm Minsta avstånd mellan innerlagret PTH till linjen ： 0,2 mm Size：214mm×148mm Bildförhållande: 8: 1 Ytbehandling: ENIG Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω Applications: Consumer electronics

Skicka e-post till oss Ladda ner som PDF

Produktdetalj

FAQ

produkt~~POS=TRUNC

High-TG PCB Advanced Circuits Specification

The glass transition temperature of PCB, referred to as "Tg", indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.

Standard PCBs are manufactured with materials offering a TG value of 140°C, which can withstand an operating temperate of 110°C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 High TG material can often provide the best solution.

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Funktion	Förmågor
Lagerantal	3-60L
Tillgänglig multilayer PCB-teknik	Genomgående hål med bildförhållande 16: 1
	begravd och blind via
	Hybrid	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Tjocklek	0,3 mm-8 mm
Minsta radbredd och mellanslag	0,05 mm / 0,05 mm (2 mil / 2 mil)
BGA PITCH	0,35 mm
Min mekanisk borrad storlek	0,15 mm (6 mil)
Bildförhållande för genomgående hål	16: 1
Ytfinish	HASL, Blyfri HASL, ENIG, Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating Hard Gold, Selective OSP ， ENEPIG.etc.
Via fyllningsalternativ	Via pläteras och fylls med antingen ledande eller icke-ledande epoxi, därefter täcks och pläteras över (VIPPO)
	Kopparfylld, silverfylld
Registrering	± 4 mil
Lödmask	Grön, röd, gul, blå, vit, svart, lila, matt svart, matt grön. Etc.