Rigid flex pcb multilayer flexible pcb HDI Any-Layer PCBs stacked vias | YMSPCB
Tenyetseheng Flex PCB ke eng?
Liboto tsa potoloho tse hatisitsoeng tsa Rigid-Flex are boards using a combination of flexible and rigid board technologies in an application.
Ts'ebeliso e nepahetseng ea liboto tsa potoloho tsa Rigid-Flex e fana ka tharollo e nepahetseng bakeng sa maemo a thata, a fokolang a sebaka. Mahlale ana a fana ka monyetla oa khokahano e sireletsehileng ea lisebelisoa tsa sesebelisoa ka netefatso ea polarity le botsitso ba khokahano, hammoho le phokotso ea likarolo tsa plug le sehokedi.
Melemo e meng ea liboto tsa potoloho tsa Rigid-Flex ke botsitso bo matla le bo etsoang ka mokhoa o ikhethileng, e leng tokoloho ea meralo e kopantseng lintho tse 3, ho kenya lintho tse nolofalitsoeng, ho boloka sebaka le ho boloka litšobotsi tsa motlakase tse tšoanang.
entsprechen
Lera: 8L tenyetseheng Flex pcb
Monahano oa Boto: 0.69mm +/- 0.1mm
PCB botenya karolong Flex: 0.5mm +/- 0.05mm
Base Boitsebiso: PI + FR4pp
Mets tham mong bang laser Hole: 0.075mm (3mil)
Mekoting e nyane ea mochini: 0.15mm
Bonyane ba Line Width / clearance: 0.046mm / 0.046mm (1.8mil / 1.8mil)
Phokotso e nyane lipakeng tsa lera la kahare PTH le Line: 0.175mm
Boholo: 160.92mm × 145mm
Tekanyo ea likarolo: 4.6: 1
Holim kalafo: ENIG
Tse khethehileng: Tenyetseheng tenyetseheng pcb multilayer fpc HDI Any-lera PCBs stacked vias, Fine oa potoloho 1.8mil, High kitlano Interconnect PCB 1.8mil / 1.8mil, Laser ka koporo tlotsitsoe koaloa
Phapang impedance 100 + 7 / -8Ω
Likopo: Setsi sa bongaka
YMS thata Flex PCB etsa thepa bapa :
YMS tenyetseheng Flex PCB bokgoni ho etsa thepa kakaretso | ||
Tšobotsi | bokhoni | |
Palo ea Lera | 2-20L | |
Botenya-Flex botenya | 0.3mm-5.0mm | |
PCB botenya karolong Flex | 0.08-0.8mm | |
koporo botenya | 1 / 4OZ-10OZ | |
Bophara ba mola le Bonyane | 0.05mm / 0.05mm (2mil / 2mil) | |
Li-stiffeners | Lisebelisoa tse se nang tšepe, PI, FR4 jj. | |
Boitsebiso | Polyimide Flex + FR4, RA koporo, HTE koporo, polyimide, sekgomaretsi, Bondply | |
Mets phethahetse Drilled Size | 0.15mm (6mil) | |
Mets laser Hole Size: | 0.075mm (3mil)) | |
Holim qeta | E loketse Microwave / RF PCB urface e phethela: Nickel e se nang motlakase, Khauta e Khethiloeng, ENEPIG, E etella pele mahala HASL, qoelisoa Silver.etc. | |
Mask ea solder | Green, Red, Yellow, Blue, White, Black, Pherese, Matte Black, Matte tala.etc. | |
Covrelay (Karolo ea Flex) | Sekoahelo se sehlahla, WhiteCoverlay, Black Coverlay |
Ithute haholoanyane ka lihlahisoa tsa YMS
Bala litaba tse ling
PCB ea flex ke eng?
Flexible PCBs (FPC) are the PCBs that can be bent or twisted without damaging the circuits, which means the boards can be bent freely to conform to the desired shape during applications. The material the substrate used is flexible, such as Polyamide, PEEK, or a conductive polyester film.