High Tg PCB Advanced PCB Manufacturing| YMS PCB

Short Tlhaloso:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs.

entsprechen

Layers: 4L High Tg FR4 Material

Monahano oa Boto: 1.6mm

Base Material:EM827 High tg

Mekoti e Monyane: 0.2mm

Bophara ba Line Line Bophara / Tlhakiso: 0.075mm / 0.075mm

Phokotso e nyane lipakeng tsa lera la kahare PTH ho Line: 0.2mm

Size：208mm×148mm

Tšobotsi karo-karolelano: 8: 1

Surface treatment：Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics

Romela ya imeile ho re Download ka PDF

Product Qaqileng

Tags sehlahisoa

How do I classify high-TG materials?

Boitsebiso	TG	MOT
FR4-standard-TG	130°C	110°C
FR4-mittel-TG	150°C	130°C
FR4-hoch-TG	170°C	150°C
Polyimid-Super-hoch-TG-Material	250°C	230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.

You may apply the following values:

Material type	Typical „TG“
CEM1	110-130°C
FR4	120-180°C
PTFE	200-260°C
Ceramic	200-300°C
Polyimide	200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Tšobotsi	bokhoni
Palo ea Lera	3-60L
Fumaneha Multilayer PCB Technology	Ho pholletsa le lesoba le Palo ea Likarolo 16: 1
	patoa ebile o foufetse ka
	Motsoako	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Botenya	0.3mm-8mm
Bophara ba mola le Bonyane	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0.35 limilimithara
Mets phethahetse Drilled Size	0.15mm (6mil)
Boemo ba tšobotsi bakeng sa lesoba	16: 1
Holim qeta	HASL, E etella pele mahala HASL, ENIG, qoelisoa Tin, OSP, qoelisoa Silver, Gold monoana, Electroplating Hard Khauta, khetla OSP ， ENEPIG.etc.
Ka Khetho ea ho Tlatsa	Tsela e koahetsoe ebe e tlatsoa ka epoxy e tsamaisang kapa e sa tsamaeeng ebe e koaheloa le ho koaheloa (VIPPO)
	Koporo e tlatsitsoe, silevera e tletse
Ngoliso	± 4mil
Mask ea solder	Green, Red, Yellow, Blue, White, Black, Pherese, Matte Black, Matte tala.etc.