Double sided pcb Normal pcb Lead free HASL Counterbore Manufacturer | YMS PCB
HAL(Lead Free), the full name is Hot Air leveling with Lead Free. Compared with HASL, the main difference for HAL(Lead Free) is the element of material which do not contain Lead(Pb), so it’s RoHS Compliant and it’s much more popular and widely used in pcb yekugadzira .
HAL(Lead Free) requires higher run temperatures for lead free solder and longer contact time, the production cost for HAL(Lead Free) is slightly higher than HASL(Tin/Lead).
The manufacturing process of HAL(Lead Free) is similar to HASL(Tin/Lead), the circuit boards will be submersed in molten solder(Lead Free). This solder will cover all the exposed copper surfaces. Upon retraction from the solder, high pressure hot air is blown over the surface through air knives, this levels the solder deposit and removes the excess solder from the surface of printed circuit boards.
Yakadhindwa Circuit Bhodhi Sumo
Normal Printed Circuit Board: Most PCBs for simple electronics are simple and composed of only a single layer. More sophisticated hardware such as computer graphics cards or motherboards can have 2 or multiple layers, sometimes up to twelve.
A printed circuit board (PCB) mechanically supports and electrically connects electrical or electronic components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate. Components are generally soldered onto the PCB to both electrically connect and mechanically fasten them to it.PCBs can be single-sided (one copper layer), double-sided (two copper layers on both sides of one substrate layer), or multi-layer (outer and inner layers of copper, alternating with layers of substrate). Multi-layer PCBs allow for much higher component density, because circuit traces on the inner layers would otherwise take up surface space between components. The rise in popularity of multilayer PCBs with more than two, and especially with more than four, copper planes was concurrent with the adoption of surface mount technology.
What is the difference between a Countersink and a Counterbore?
YMS Yakajairwa pcb yekugadzira kugona:
YMS Yakajairwa pcb yekugadzira kugona kuongorora | ||
Feature | kugona | |
Layer Count | 1-60L | |
Inowanikwa Yakajairika pcb Technology | Kuburikidza neburi neAspect Ratio 16: 1 | |
akavigwa uye bofu kuburikidza | ||
Mbeu dzakauchikwa | Yakakwira Frequency Chinyorwa senge RO4350B uye FR4 Sanganisa nezvimwe. | |
Yekumhanyisa Zvinhu zvakadai seM7NE uye FR4 Sanganisa nezvimwe. | ||
Mashoko | CEM- | CEM-1; CEM-2, CEM-4, CEM-5.etc |
FR4 | EM827, 370HR, S1000-2, IT180A, IT158, S1000 / S1155, R1566W, EM285, TU862HF, NP170G nezvimwewo. | |
Kumhanya Kwakanyanya | Megtron6, Megtron4, Megtron7, TU872SLK, FR408HR, N4000-13 Series, MW4000, MW2000, TU933 nezvimwe. | |
Yakakwira Frequency | Ro3003, Ro3006, Ro4350B, Ro4360G2, Ro4835, CLTE, Genclad, RF35, FastRise27 nezvimwe. | |
Vamwe | Polyimide, Tk, LCP, BT, C-Dzinogara, Fradflex, Omega, ZBC2000, Peek, PTFE, zvedongo-kwakavakirwa etc. | |
Ukobvu | 0.3mm-8mm | |
Max.copper Ukobvu | 10OZ | |
Minimum mutsara Hupamhi uye Nzvimbo | 0.05mm / 0.05mm (2mil / 2mil) | |
BGA PITCH | 0.35mm | |
Min michina Yakaboorwa Saizi | 0.15mm (6mil) | |
Aspect Ratio kuburikidza nepaburi | 16: 1 | |
Pamusoro Pedza | HASL, Tungamira yemahara HASL, ENIG, Kunyudza Tin, OSP, Kunyudza Sirivheri, Goridhe Munwe, Electroplating Hard Goridhe, Inosarudza OSP, ENEPIG.etc. | |
Via Zadza Sarudzo | Iyo nzira inoputirwa uye izere neyakaitisa kana isingaitise epoxy yakabva yadhinda uye kufukidzwa pamusoro (VIPPO) | |
Mhangura yakazadzwa, sirivheri yakazadzwa | ||
Kunyoresa | ± 4mil | |
Solder Mask | Green, Tsvuku, Yero, Bhuruu, Chena, Dema, Pepuru, Matte Nhema, Matte girini.etc. |
Unogona Kuda:
1, Summary zvinhu zvinoda kugadziriswa mune redunhu bhodhi nomoto
3, chii pcb
4、Chii chiri pachena bhodhi kuyedza?
5. Chii chakakwirira frequency PCB dhizaini