China High Tg PCB Advanced PCB Manufacturing| YMS PCB factory and manufacturers | Yongmingsheng
Talia i lo tatou website.

High Tg PCB Advanced PCB Manufacturing| YMS PCB

Faamatalaga puupuu:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs. 

le faataamilosaga

Layers: 4L High Tg FR4 Material

Mafaufauga a le Komiti: 1.6mm

Base Material:EM827 High tg

Min Lone: 0.2mm

Lautele aupito lautele laina / kilia: 0.075mm / 0.075mm

Maualalo kilia i le va Totonu Totonu PTH i Line : 0.2mm

Size:208mm×148mm

Vaega Fua Faatusatusa: 8: 1

Surface treatment:Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics


Faamatalaga oloa

pine o oloa

How do I classify high-TG materials?

Meafaitino TG MOT
FR4-standard-TG 130°C 110°C
FR4-mittel-TG 150°C 130°C
FR4-hoch-TG 170°C 150°C
Polyimid-Super-hoch-TG-Material 250°C 230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance. 

You may apply the following values:

Material type Typical „TG“
CEM1 110-130°C
FR4 120-180°C
PTFE 200-260°C
Ceramic 200-300°C
Polyimide 200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview

Faʻaaliga agavaʻa
Faʻamaumauga 3-60L
Avanoa Multilayer PCB Tekonolosi Ala i pu ma Aspect Fua Faʻatatau 16: 1
tanu ma tauaso ala
Fa'atosina High Frequency Material such as RO4350B and FR4 TG 180°Mix  etc.
High Speed Material such as M7NE and FR4 TG 180°Mix   etc.
Mafiafia 0.3mm-8mm
Maualalo laina lautele ma avanoa 0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH 0.35mm
Min masini Viliina lapoa 0.15mm (6mil)
Aspect Fua faʻatusatusa mo ala pu 16: 1
Luga Faʻamaeʻaina HASL, Lead free HASL, ENIG, Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating Hard Gold, Filifili OSP, ENEPIG.etc.
Via Faatumu Filifiliga O le ala e ufiufi ma faʻatumuina i le epoxy faʻataʻitaʻi poʻo le le faʻataʻitaʻi ona tapuni lea ma ufiufi i luga (VIPPO)
Ua tumu le kopa, ua tumu le ario
Lesitalaina ± 4milā
Ufimata ufimata Lanumeamata, Mumu, Lanumoana, Lanumoana, Paʻepaʻe, Uliuli, lanu viole, Matte Uliuli, Matte lanumeamata.

Faitau atili tala fou


https://www.ymspcb.com/4layer-high-tg-board.html



  • Talu:
  • Sosoo ai:

  • Tusi lau savali iinei ma auina mai ia i tatou
    WhatsApp Online talatalanoaga!