Rigid flex pcb design HDI staggered vias and stacked vias Stiffener| YMSPCB

Description:

For more than 11 years, YMS PCB have developed expertise in Flexible and Rigid-Flex Printed Circuits Manufacturer for most application sectors, including HDI designs, in small, medium and large volumes. Although Flexible and Rigid-Flex solutions can provide an optimal technical response to all 3D applications, they remain somehow a costly product, mainly because of high-value material (polyimide), variety of stack-ups and complex manufacturing.

Morbi

Stratis: Seu Rigidorum VOL 8L HDI LENTO PCB

Tabula Thinkness: 0.8mm +/- 0.1mm

PCB in crassitudine inflectere sectionem: 0.1mm +/- 0.03mm

Basis Material: P. + FR4PP

Min mechanica egréssus: 0.15mm

Minimum line width / Clearance: 0.05mm / 0.05mm (2mil / 2mil)

Iacuit inter interiorem et linea PTH minimum Clearance: 0.2mm

Magnitudine: 186.02mm × 169.2mm

Aspect Ratio: 5.33: I

Superficiem treatment: enig

Specialty: rigidum pcb HDI venerunt duae et tres vias tuas inflectere, et comprehenderit acervos vias stiffener Aliquam ferro et 3m tenaces tape, Laser aeris patella per operculi

Diversus IMMINENTIA VII C + / -8Ω

Applications: TWS Earphones

Mitte nobis inscriptio Linguis

Product Detail

FAQ

Product Tags

Seu Rigidorum VOL uber-LENTO rationes includit:

Typus I: No flexile quidem erant cum materia seu absque scuto (s) seu stiffener (PROLIXUS unum layer).
Typus II: flexibile materia duplex postesque cum aut sine scuto (s) seu stiffener (conductor duo stratis), in patella per foramina.
Typus III: multilayer flexibile cum materia seu absque scuto (s) seu stiffener (conductor magis quam duo stratis), in patella per foramina, HDI.
Typus IV: multilayer materiam duram et ductilem junctiones (conductor magis quam duo stratis), in patella per foramina, HDI.

YMS Seu Rigidorum VOL LENTO PCB faciens capa capacitatem capam;

Seu Rigidorum VOL YMS LENTO PCB vestibulum elit Overview
feature	facultatem
stratum comitis	2-20L
Seu Rigidorum VOL Crassitudine-LENTO	0.3mm, 5.0mm
PCB crassitudine sectionem in flex	0.08-0.8mm
Crassitudo aeris	I / 4oz 10OZ,
Vivamus ipsum aciem spatium minimum	0.05mm / 0.05mm (2mil / 2mil)
stiffeners	Aliquam ferro, P. I, FR4 Aluminium etc.
material	Polyimide LENTO + FR4 RA aeris, aeris HTE, Polyimide, tenaces: Bondply
Min Location mechanica Drilled	0.15mm (6mil)
Laser egréssus min Size:	0.075mm (3mil)
Conclusio superficiem	Proin idoneam / M. PCB urface ratio exigit: Electroless Nickel: Aurum immersionis, ENEPIG, removerit Category: immersionis Silver.etc.
Os solidaturam	Viridis, Red, Yellow, cæruleus, albus, Nigrum, Purple, Matte Nigrum, Matte green.etc.
Covrelay (LENTO Part)	Yellow Coverlay, WhiteCoverlay: Nigrum Coverlay