High Tg material PCB 6 Layer High Tg Board| YMS PCB

Description:

High TG PCBs have an array of applications, from engines to industrial processes, WiFi boosters, and computer systems. They mitigate the internal damage a machine does to itself when it functions by raising the tolerance of a device to heat, moisture, and chemical corrosion. Not only do they improve functionality, but they also enhance the lifespan of PCBs in general by reducing common issues like short-circuiting. If you are looking to get the best-embedded systems or a high TG PCB manufacturing , look no further. You can use YMS technology to design your high TG PCB boards.

Morbi

Layers: 6L High Tg FR4 Material Tabula Thinkness: 1.6mm Base Material:EM827 High tg Min egréssus: 0.2mm Minimum line width / Clearance: 0.075mm / 0.075mm Stratum PTH ad interiora minimam inter lineam Clearance: 0.2mm Size：214mm×148mm Aspect Ratio: VIII: I Superficiem treatment: enig Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω Applications: Consumer electronics

Mitte nobis inscriptio Linguis

Product Detail

FAQ

Product Tags

High-TG PCB Advanced Circuits Specification

The glass transition temperature of PCB, referred to as "Tg", indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.

Standard PCBs are manufactured with materials offering a TG value of 140°C, which can withstand an operating temperate of 110°C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 High TG material can often provide the best solution.

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
feature	facultatem
stratum comitis	3-60L
Available multilayer PCB Technology	Et per foraminis Aspect Ratio XVI: I
	et per buried cæcus
	hybrid	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
crassitudine	0.3mm, 8mm
Vivamus ipsum aciem spatium minimum	0.05mm / 0.05mm (2mil / 2mil)
BGA CASTRA	0.35mm
Min Location mechanica Drilled	0.15mm (6mil)
Aspect Ratio enim per foraminis	XVI: I
Conclusio superficiem	Removerit, removerit Category: enig, immersionis Stannum OSP immersionis argenti Digitus Aurum, Aurum Puer electroplating, electionem selectivam OSP ENEPIG.etc.
Via Bene Reple	Et per hoc in patella repleti PROLIXUS vel epoxy erit PROLIXUS vel non-capped et super patella (VIPPO)
	Aere impleta implebitur pecunia
Registration	± 4mil
Os solidaturam	Viridis, Red, Yellow, cæruleus, albus, Nigrum, Purple, Matte Nigrum, Matte green.etc.