10 층의 유리 전이 온도가 높은 침수 골드 Boad | YMS의 PCB

간단한 설명:

Parameters Layers: 10

기본 재질 : S1170

두께 : 1.6

최소 라인 폭 / 정리 : 0.10mm / 0.10mm

크기 : 100mm × 100mm

화면 비율 : 16 : 1

표면 처리 : ENIG

Crafts Immersion Gold：4“ 2 Step HDI Resin Plug Hole Technology High Frequency Board

응용 프로그램 : 통신

우리에게 이메일을 보내 PDF로 다운로드

제품 상세 정보

제품 태그

무전 해 니켈 또는 침수 골드 (99.9 퍼센트 골드)

　　▪ 일반적인 두께는 0.08 μm의 또는 0.000003 인치 0.2㎛, 또는 0.000008 인치 금이 0.5㎛ 또는 0.0002 인치 위에 니켈 인

　　▪ 부식 우수한 저항

　　▪ 알루미늄 와이어 본딩에 적합

　　▪ 미세 피치 기술의 사용에 대한 매우 좋음

　　▪ 납땜을위한 우수한 능력

　　▪ 아주 좋은 수명

In PCI and light module, line socket, a large number of use of goldfinger, goldfinger has been divided into: long goldfinger, broken section goldfinger, split goldfinger;

Goldfinger plate in the process of processing, need to pull the gold-plated wire, conventional goldfinger processing process is relatively simple, long and short goldfinger, the goldfinger leads need to be strictly controlled, need to complete the second etching.

It is more difficult to break the section of goldfinger than the length of the goldfinger, requiring dry film 3 times of process, the lead does not remain 4 times to complete the goldfinger production, often 90% of the goldfinger control is unable to process.

YMSPCB processing plug goldfinger and short and short goldfinger, broken section goldfinger, master the core manufacturing technology, single goldfinger gold-plated thickness up to 50U gold, industrial graphics card PCI can be processed to 50U gold;

Gilding is called hard gold. Why does goldfinger need gilding?

Because of the use of graphics card and plug, often circuit board often need to plug, gold-plated is the hardware, plug up to 200,000 times;

Shen jin is software, the number of plug and insert is limited, each plug and insert will reduce the life of goldfinger;

Gold plating is hard gold, in the extraction of gold, gold in the process of extraction of hardness, gold plating in the extraction of excellent performance, conductive performance can improve the efficiency of conduction.