China High Tg PCB Advanced PCB Manufacturing| YMS PCB factory and manufacturers | Yongmingsheng
Velkomin á heimasíðu okkar.

High Tg PCB Advanced PCB Manufacturing| YMS PCB

Stutt lýsing:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs. 

færibreytur

Layers: 4L High Tg FR4 Material

Hugsun stjórnar: 1,6 mm

Base Material:EM827 High tg

Mín holur: 0,2 mm

Lágmarks línubreidd / úthreinsun : 0,075 mm / 0,075 mm

Lágmarksúthreinsun milli innra lags PTH að línu : 0,2 mm

Size:208mm×148mm

Hlutföll: 8: 1

Surface treatment:Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics


vara Detail

Vara Tags

How do I classify high-TG materials?

Efni TG MOT
FR4-standard-TG 130°C 110°C
FR4-mittel-TG 150°C 130°C
FR4-hoch-TG 170°C 150°C
Polyimid-Super-hoch-TG-Material 250°C 230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance. 

You may apply the following values:

Material type Typical „TG“
CEM1 110-130°C
FR4 120-180°C
PTFE 200-260°C
Ceramic 200-300°C
Polyimide 200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview

Lögun getu
Fjöldi laga 3-60L
Laus marglaga PCB tækni Í gegnum holu með hlutföllum 16: 1
grafinn og blindur via
Blendingur High Frequency Material such as RO4350B and FR4 TG 180°Mix  etc.
High Speed Material such as M7NE and FR4 TG 180°Mix   etc.
Þykkt 0,3 mm-8 mm
Lágmarks línubreidd og bil 0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH 0,35mm
Lítil vélræn boruð stærð 0,15 mm (6míl)
Hlutfall hlutfalls fyrir holu 16: 1
Yfirborðsfrágangur HASL, blýlaust HASL, ENIG, Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating hard Gold, Selective OSP , ENEPIG.etc.
Með fyllingarvalkosti The via er húðaður og fylltur með annað hvort leiðandi eða óleiðandi epoxý, síðan lokað og húðað yfir (VIPPO)
Kopar fyllt, silfur fyllt
Skráning ± 4míl
Lóðmálmur Grænn, Rauður, Gulur, Blár, Hvítur, Svartur, Fjólublár, Matte Svartur, Matur grænn osfrv.

Lestu fleiri fréttir


https://www.ymspcb.com/4layer-high-tg-board.html



  • Fyrri:
  • Next:

  • Skrifaðu skilaboðin hér og senda það til okkar
    WhatsApp Online Chat!