High Tg material PCB 6 Layer High Tg Board| YMS PCB

Nkọwa nkenke:

High TG PCBs have an array of applications, from engines to industrial processes, WiFi boosters, and computer systems. They mitigate the internal damage a machine does to itself when it functions by raising the tolerance of a device to heat, moisture, and chemical corrosion. Not only do they improve functionality, but they also enhance the lifespan of PCBs in general by reducing common issues like short-circuiting. If you are looking to get the best-embedded systems or a high TG PCB emeputa , look no further. You can use YMS technology to design your high TG PCB boards.

kwa

Layers: 6L High Tg FR4 Material Echiche echiche: 1.6mm Base Material:EM827 High tg Min Oghere: 0.2mm Kacha nta Line Obosara / nwechapụ ： 0.075mm / 0.075mm Nwepu pere mpe dị n'etiti Layer Ne PTH na Line ： 0.2mm Size：214mm×148mm Akụkụ ruru: 8: 1 N'elu omume: ENIG Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω Applications: Consumer electronics

Send email anyị Download ka PDF

Product Ihe

Ajụjụ

Ngwaahịa

High-TG PCB Advanced Circuits Specification

The glass transition temperature of PCB, referred to as "Tg", indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.

Standard PCBs are manufactured with materials offering a TG value of 140°C, which can withstand an operating temperate of 110°C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 High TG material can often provide the best solution.

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Njirimara	ikike
Layer agụ	3-60L
Multilayer PCB Technology dị	Site na oghere na akụkụ 16: 1
	lie ma kpuo ìsì via
	Ngwakọ	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Ọkpụrụkpụ	0.3mm-8mm
Opekempe akara Obosara na Ohere	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0.35mm
Min n'ibu gbapuru Size	0.15mm (6mil)
Akụkụ Ratio maka site na oghere	16: 1
Elu rụchaa	HASL, Duru free HASL, ENIG, Imikpu Tin, OSP, ọlaọcha imikpu, mkpịsị aka mkpịsị aka, Ntinye ọla edo siri ike, ịhọrọ OSP ， ENEPIG.etc.
Via Dejupụta Nhọrọ	The via na-plated ma jupụta ma conductive ma ọ bụ ndị na-abụghị conductive epoxy ahụ capped na plated n'elu (VIPPO)
	Ọla kọpa jupụtara, ọlaọcha jupụtara
Ndebanye aha	± 4mil
Nkpuchi Solder	Green, Red, Yellow, Blue, White, Nwa, Purple, Matte Black, Matte green. Wdg.