High Tg PCB Advanced PCB Manufacturing| YMS PCB

Nkọwa nkenke:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs.

kwa

Layers: 4L High Tg FR4 Material

Echiche echiche: 1.6mm

Base Material:EM827 High tg

Min Oghere: 0.2mm

Kacha nta Line Obosara / nwechapụ ： 0.075mm / 0.075mm

Nwepu pere mpe dị n'etiti Layer Ne PTH na Line ： 0.2mm

Size：208mm×148mm

Akụkụ ruru: 8: 1

Surface treatment：Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics

Send email anyị Download ka PDF

Product Ihe

Ngwaahịa

How do I classify high-TG materials?

Ihe onwunwe	TG	MOT
FR4-standard-TG	130°C	110°C
FR4-mittel-TG	150°C	130°C
FR4-hoch-TG	170°C	150°C
Polyimid-Super-hoch-TG-Material	250°C	230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.

You may apply the following values:

Material type	Typical „TG“
CEM1	110-130°C
FR4	120-180°C
PTFE	200-260°C
Ceramic	200-300°C
Polyimide	200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Njirimara	ikike
Layer agụ	3-60L
Multilayer PCB Technology dị	Site na oghere na akụkụ 16: 1
	lie ma kpuo ìsì via
	Ngwakọ	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Ọkpụrụkpụ	0.3mm-8mm
Opekempe akara Obosara na Ohere	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0.35mm
Min n'ibu gbapuru Size	0.15mm (6mil)
Akụkụ Ratio maka site na oghere	16: 1
Elu rụchaa	HASL, Duru free HASL, ENIG, Imikpu Tin, OSP, ọlaọcha imikpu, mkpịsị aka mkpịsị aka, Ntinye ọla edo siri ike, ịhọrọ OSP ， ENEPIG.etc.
Via Dejupụta Nhọrọ	The via na-plated ma jupụta ma conductive ma ọ bụ ndị na-abụghị conductive epoxy ahụ capped na plated n'elu (VIPPO)
	Ọla kọpa jupụtara, ọlaọcha jupụtara
Ndebanye aha	± 4mil
Nkpuchi Solder	Green, Red, Yellow, Blue, White, Nwa, Purple, Matte Black, Matte green. Wdg.