Extreme Copper PCB 2 Layer 10 0z Heavy Copper Board| YMS PCB
The construction of a heavy copper circuit endows a board with benefits such as:
- Increased endurance to thermal strains.
- Increased current carrying capacity.
- Increased mechanical strength at connector sites and in PTH holes.
- Use of exotic materials to their full potential without circuit failure.
- Reduced product size by incorporating multiple copper weights on the same layer of circuitry .
- Heavy copper plated vias carry higher current through the board and help to transfer heat to an external heatsink.
Ikike nrụpụta PCB ọla kọpa YMS dị arọ:
| Nyocha ike nrụpụta PCB YMS dị arọ ọla kọpa | ||
| Njirimara | ikike | |
| Layer agụ | 1-30L | |
| Base ihe | FR-4 Ọkọlọtọ Tg, FR4-etiti Tg, FR4-Elu Tg | |
| Ọkpụrụkpụ | 0.6 mm - 8.0mm | |
| Ibu ọla kọpa kacha elu (Emechara) | 15OZ | |
| Ibu ọla kọpa kacha elu (Emechara) | 30OZ | |
| Opekempe akara Obosara na Ohere | 4oz Cu 8mil/8mil; 5oz Cu 10mil/10mil; 6oz Cu 12mil/12mil; 12oz Cu 18mil/28mil; 15oz Cu 30mil/38mil .etc. | |
| BGA PITCH | 0.8mm (32mil) | |
| Min n'ibu gbapuru Size | 0.25mm (10mil) | |
| Akụkụ Ratio maka site na oghere | 16 ： 1 | |
| Elu rụchaa | HASL, Duru free HASL, ENIG, Imikpu Tin, OSP, ọlaọcha imikpu, mkpịsị aka mkpịsị aka, Ntinye ọla edo siri ike, ịhọrọ OSP ， ENEPIG.etc. | |
| Via Dejupụta Nhọrọ | The via na-plated ma jupụta ma conductive ma ọ bụ ndị na-abụghị conductive epoxy ahụ capped na plated n'elu (VIPPO) | |
| Ọla kọpa jupụtara, ọlaọcha jupụtara | ||
| Ndebanye aha | ± 4mil | |
| Nkpuchi Solder | Green, Red, Yellow, Blue, White, Nwa, Purple, Matte Black, Matte green. Wdg. | |
May nwere ike amasị:
1、What are the precautions for heavy copper PCB wiring
2、What are the specifications of heavy copper PCB
3、What are the heavy copper PCB materials
Mụtakwuo maka ngwaahịa YMS
Dee ozi gị ebe a na-ezite ya anyị
