High Tg PCB Advanced PCB Manufacturing| YMS PCB

Luv hauj lwm:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs.

tsis

Layers: 4L High Tg FR4 Material

Pawg thawj coj xav: 1.6 hli

Base Material:EM827 High tg

Min Qhov: 0.2mm

Yam tsawg kawg Kab Dav / Tshem Tawm ： 0.075mm / 0.075mm

Kev Tawm Tsam Tsawg Kom Nruab Nrab ntawm Txheej Txheej PTH rau Kab ： 0.2mm

Size：208mm×148mm

Nam piv: 8: 1

Surface treatment：Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics

Xa email rau peb Download tau li PDF

khoom Nthuav dav

khoom cim npe

How do I classify high-TG materials?

Cov khoom siv	TG	MOT
FR4-standard-TG	130°C	110°C
FR4-mittel-TG	150°C	130°C
FR4-hoch-TG	170°C	150°C
Polyimid-Super-hoch-TG-Material	250°C	230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.

You may apply the following values:

Material type	Typical „TG“
CEM1	110-130°C
FR4	120-180°C
PTFE	200-260°C
Ceramic	200-300°C
Polyimide	200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Ntseg	muaj peev xwm
Txheej Txheej	3-60L
Muaj Multilayer PCB Tshuab Ntau	Los ntawm qhov nrog Aspect Ratio 16: 1
	faus thiab dig muag ntawm
	Lub Tshoob	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Thickness	0.3 hli-8 hli
Yam tsawg kawg kab Dav thiab qhov chaw	0.05mm / 0.05mm (2mil / 2mil)
BGA CHAW	0.35 hli
Min mechanical Drilled Qhov Coob	0.15 hli (6mil)
Saib tus ntsuas rau ntawm lub qhov	16: 1
Nto xaus	HASL, Lead dawb HASL, ENIG, Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating Hard Kub, Xaiv OSP ， ENEPIG.etc.
Ntawm Cov Kev Xaiv Sau	Qhov ntawm yog plated thiab tau sau nrog nrog conductive lossis tsis-conductive epoxy ces capped thiab plated dhau (VIPPO)
	Tooj liab ntim, tau sau nyiaj
Sau npe	4mil
Tus Neeg Muag Khoom Daim npog qhov ncauj	Ntsuab, Liab, Daj, Xiav, Dawb, Dub, Ntshav, Matte Dub, Matte green.etc.