High Tg material PCB 6 Layer High Tg Board| YMS PCB

Descrición curta:

High TG PCBs have an array of applications, from engines to industrial processes, WiFi boosters, and computer systems. They mitigate the internal damage a machine does to itself when it functions by raising the tolerance of a device to heat, moisture, and chemical corrosion. Not only do they improve functionality, but they also enhance the lifespan of PCBs in general by reducing common issues like short-circuiting. If you are looking to get the best-embedded systems or a high TG fabricante de PCB , look no further. You can use YMS technology to design your high TG PCB boards.

parámetros

Layers: 6L High Tg FR4 Material Pensamento da placa: 1,6 mm Base Material:EM827 High tg Min buratos: 0,2 mm Ancho / distancia mínima de liña ： 0,075 mm / 0,075 mm Distancia mínima entre capa interna PTH e liña ： 0,2 mm Size：214mm×148mm Proporción: 8: 1 tratamento de superficie: ENIG Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω Applications: Consumer electronics

Enviar correo-e para nós Descarga como PDF

Detalles do produto

FAQ

Etiquetas de produtos

High-TG PCB Advanced Circuits Specification

The glass transition temperature of PCB, referred to as "Tg", indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.

Standard PCBs are manufactured with materials offering a TG value of 140°C, which can withstand an operating temperate of 110°C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 High TG material can often provide the best solution.

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Función	capacidades
Reconto de capas	3-60L
Tecnoloxía PCB multicapa dispoñible	Orificio pasante con relación de aspecto 16: 1
	enterrado e cego vía
	Híbrido	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Espesor	0,3 mm-8 mm
Ancho e espazo mínimo da liña	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0,35 mm
Tamaño mínimo perforado mecánico	0,15 mm (6 millas)
Relación de aspecto para o burato pasante	16: 1
Acabado superficial	HASL, HASL sen chumbo, ENIG, estaño de inmersión, OSP, prata de inmersión, dedo de ouro, ouro duro galvanizado, OSP selectivo ， ENEPIG.etc.
Opción de recheo vía	A vía está chapada e chea de epoxi condutora ou non condutora e logo tapada e chapada (VIPPO)
	Enchido de cobre, cheo de prata
Rexistro	± 4mil
Máscara de soldar	Verde, vermello, amarelo, azul, branco, negro, roxo, negro mate, verde mate.etc.