High Tg PCB Advanced PCB Manufacturing| YMS PCB

Cur síos achomair:

High-TG-Material start at around TG of 170°C. Most high-TG materials up to TG170°C are based on FR4 fibre-glass/epoxy compounds and are produced and processed like standard PCBs.

paraiméadair

Layers: 4L High Tg FR4 Material

Smaointeoireacht an Bhoird: 1.6mm

Base Material:EM827 High tg

Poill Min: 0.2mm

Leithead / Imréiteach Íosta Líne ： 0.075mm / 0.075mm

Íos-Imréiteach idir Ciseal Istigh PTH go Líne ： 0.2mm

Size：208mm×148mm

Cóimheas Treoíochta: 8: 1

Surface treatment：Lead free HASL

Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω

Applications: Consumer electronics

Seol r-phost chugainn Íoslódáil mar PDF

Sonraigh Táirge

Táirge Clibeanna

How do I classify high-TG materials?

Ábhar	TG	MOT
FR4-standard-TG	130°C	110°C
FR4-mittel-TG	150°C	130°C
FR4-hoch-TG	170°C	150°C
Polyimid-Super-hoch-TG-Material	250°C	230°C

ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: "temperature of glass transition". Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.

You may apply the following values:

Material type	Typical „TG“
CEM1	110-130°C
FR4	120-180°C
PTFE	200-260°C
Ceramic	200-300°C
Polyimide	200-350°C

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Gné	cumais
Líon Sraitheanna	3-60L
Teicneolaíocht PCB Multilayer atá ar fáil	Trí pholl le Cóimheas Gné 16: 1
	adhlactha agus dall trí
	Hibrid	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Tiús	0.3mm-8mm
Leithead agus Spás Íosta líne	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0.35mm
Méid Druileáilte Min meicniúil	0.15mm (6mil)
Cóimheas Gné le haghaidh trí pholl	16: 1
Críochnaigh Dromchla	HASL, HASL saor ó luaidhe, ENIG, Stáin Tumoideachais, OSP, Airgead Tumoideachais, Méar Óir, Óir Crua Leictreaphlátála, OSP Roghnach ， ENEPIG.etc.
Trí Rogha Líon	Déantar an via a phlátáil agus a líonadh le eapocsa seoltaí nó neamh-seoltaí agus ansin uasteorannú agus plátáil air (VIPPO)
	Copar líonta, airgead líonta
Clárú	± 4mil
Masc solder	Glas, Dearg, Buí, Gorm, Bán, Dubh, Corcra, Neamhlonrach Dubh, Neamhlonrach glas.etc.