High Tg material PCB 6 Layer High Tg Board| YMS PCB

Koarte beskriuwing:

High TG PCBs have an array of applications, from engines to industrial processes, WiFi boosters, and computer systems. They mitigate the internal damage a machine does to itself when it functions by raising the tolerance of a device to heat, moisture, and chemical corrosion. Not only do they improve functionality, but they also enhance the lifespan of PCBs in general by reducing common issues like short-circuiting. If you are looking to get the best-embedded systems or a high TG PCB fabrikant , look no further. You can use YMS technology to design your high TG PCB boards.

parameters

Layers: 6L High Tg FR4 Material Board Thinkness: 1,6 mm Base Material:EM827 High tg Min gatten: 0,2 mm Minimale rigelbreedte / klaring ： 0,075 mm / 0,075 mm Minimale ôfstân tusken binnenlaach PTH nei line ： 0.2mm Size：214mm×148mm Aspect Ratio: 8: 1 Oerflak treatment: enig Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω Applications: Consumer electronics

E-post stjoere oan ús Download as PDF

produkt Detail

FAQ

produkt Tags

High-TG PCB Advanced Circuits Specification

The glass transition temperature of PCB, referred to as "Tg", indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.

Standard PCBs are manufactured with materials offering a TG value of 140°C, which can withstand an operating temperate of 110°C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 High TG material can often provide the best solution.

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Eigenskip	mooglikheden
Laach telle	3-60L
Beskikbere Multilayer PCB Technology	Troch gat mei Aspektferhâlding 16: 1
	begroeven en blyn fia
	Hybride	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Dikte	0,3 mm-8 mm
Minimale rigelbreedte en romte	0.05mm / 0.05mm (2mil / 2mil)
BGA PITCH	0.35 mm
Min meganyske boarre Grutte	0,15 mm (6mil)
Aspektferhâlding foar trochgeand gat	16: 1
Oerflakte ôfwurking	HASL, Lead free HASL, ENIG, Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating Hard Gold, Selective OSP ， ENEPIG.etc.
Fia Folje-opsje	De fia is pleatst en fol mei geleidend as net-geleidend epoksy, dan bedekt en pleatst oer (VIPPO)
	Koper fol, sulver fol
Ynskriuwing	± 4mil
Solder Masker	Grien, read, giel, blau, wyt, swart, pears, mat swart, mat grien. Ensfh.