High Tg material PCB 6 Layer High Tg Board| YMS PCB

Breve descripción:

High TG PCBs have an array of applications, from engines to industrial processes, WiFi boosters, and computer systems. They mitigate the internal damage a machine does to itself when it functions by raising the tolerance of a device to heat, moisture, and chemical corrosion. Not only do they improve functionality, but they also enhance the lifespan of PCBs in general by reducing common issues like short-circuiting. If you are looking to get the best-embedded systems or a high TG fabricante de PCB , look no further. You can use YMS technology to design your high TG PCB boards.

parámetros

Layers: 6L High Tg FR4 Material Pensamiento de la placa: 1,6 mm Base Material:EM827 High tg Agujeros mínimos: 0,2 mm Ancho / espacio mínimo de línea: 0,075 mm / 0,075 mm Espacio mínimo entre la capa interior PTH y la línea: 0,2 mm Size：214mm×148mm Relación de aspecto: 8: 1 Tratamiento de la superficie: ENIG Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω Applications: Consumer electronics

Enviar correo electrónico a nosotros Descargar como PDF

Detalle del producto

Preguntas más frecuentes

Etiquetas de productos

High-TG PCB Advanced Circuits Specification

The glass transition temperature of PCB, referred to as "Tg", indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.

Standard PCBs are manufactured with materials offering a TG value of 140°C, which can withstand an operating temperate of 110°C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 High TG material can often provide the best solution.

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Característica	capacidades
Recuento de capas	3-60L
Tecnología PCB multicapa disponible	Agujero pasante con relación de aspecto 16: 1
	enterrado y ciego a través de
	Híbrido	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Grosor	0.3 mm-8 mm
Ancho y espacio mínimo de línea	0,05 mm / 0,05 mm (2 mil / 2 mil)
TONO BGA	0,35 mm
Tamaño mínimo perforado mecánico	0,15 mm (6 mil)
Relación de aspecto para orificio pasante	16: 1
Acabado de superficie	HASL, HASL sin plomo, ENIG, Estaño de inmersión, OSP, Plata de inmersión, Gold Finger, Galvanoplastia de oro duro, OSP selectivo, ENEPIG.etc.
A través de la opción de relleno	La vía se recubre y se llena con epoxi conductor o no conductor, luego se tapa y se recubre (VIPPO)
	Relleno de cobre, relleno de plata
Registro	± 4 mil
Máscara para soldar	Verde, rojo, amarillo, azul, blanco, negro, morado, negro mate, verde mate, etc.