High Tg material PCB 6 Layer High Tg Board| YMS PCB

Mallonga priskribo:

High TG PCBs have an array of applications, from engines to industrial processes, WiFi boosters, and computer systems. They mitigate the internal damage a machine does to itself when it functions by raising the tolerance of a device to heat, moisture, and chemical corrosion. Not only do they improve functionality, but they also enhance the lifespan of PCBs in general by reducing common issues like short-circuiting. If you are looking to get the best-embedded systems or a high TG PCB Fabrikejo , look no further. You can use YMS technology to design your high TG PCB boards.

parametroj

Layers: 6L High Tg FR4 Material Tabula Pensado: 1.6mm Base Material:EM827 High tg Minaj truoj: 0,2 mm Minimuma Linio-Larĝo / Malplenigo ： 0.075mm / 0.075mm Minimuma Malplenigo inter Interna Tavola PTH al Linio ： 0.2mm Size：214mm×148mm Aspect Ratio: 8: 1 Surfaca trakto: enig Single-sided impedance 55Ω±10%, Differential impedance 100+7/-8Ω Applications: Consumer electronics

Sendu retpoŝton al ni Elŝuti kiel PDF

produkto Detalo

Oftaj Demandoj

produkto Etikedoj

High-TG PCB Advanced Circuits Specification

The glass transition temperature of PCB, referred to as "Tg", indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.

Standard PCBs are manufactured with materials offering a TG value of 140°C, which can withstand an operating temperate of 110°C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 High TG material can often provide the best solution.

YMS High Tg PCB manufacturing capabilities:

YMS High Tg PCB manufacturing capabilities overview
Trajto	kapabloj
Tavola Kalkulo	3-60L
Havebla Multitavola PCB-Teknologio	Tra truo kun Bildformo 16: 1
	entombigita kaj blinda per
	Hibrida	High Frequency Material such as RO4350B and FR4 TG 180°Mix etc.
		High Speed Material such as M7NE and FR4 TG 180°Mix etc.
Dikeco	0.3mm-8mm
Minimuma linio Larĝo kaj Spaco	0.05mm / 0.05mm (2mil / 2mil)
BGA-PIKTO	0.35mm
Min mekanika Borita Grandeco	0.15mm (6mil)
Aspektoproporcio por tra truo	16: 1
Surfaca Finiĝo	HASL, Senplumba HASL, ENIG, Mergada Stano, OSP, Mergenta Arĝento, Ora Fingro, Galvanizado de Malmola Oro, Selektema OSP ， ENEPIG.etc.
Tra Pleniga Opcio	La vojo estas tegita kaj plenigita per aŭ konduka aŭ nekondukta epoksio tiam limigita kaj tegita (VIPPO)
	Kupro plenigita, arĝenta plenpleno
Aliĝo	± 4mil
Solda Masko	Verda, Ruĝa, Flava, Blua, Blanka, Nigra, Purpura, Mata Nigra, Mata verda.etc.